| Characteristics | Hard
Floor Wax is made from natural raw materials. It is hardwearing, dirt
and water-repellent, breathable, anti-static and suitable for protecting
all hard, soft and precious woods. |
||||||
| Ingredients | Citrus peel oil,
beeswax, carnauba wax, paraffin wax, wood oil, aliphatic hydrocarbons,
colophony resin, linseed oil, cobalt, zirconium and calcium-octoate driers. |
||||||
| Application | For all timber and
cork floors and panelling. |
||||||
| Preliminary treatment | Surface
must be smooth, dry (max wood moisture: 14%), clean and free from grease.
If necessary, clean with Thinner. For floors and doors, priming
with Universal Priming Oil is recommended. Consult data sheet.
Apply once or twice, depending on the absorbency of the wood. |
||||||
| Directions for use | Apply
thinly and evenly with lint free cloth. Polish after 3-6 hours and repeat
if necessary. Make a trial first. |
||||||
| Coverage |
Depends on preliminary treatment and type of application:
|
||||||
| Cleaning of implements |
Clean
with Thinner. Leave Thinner to stand, wait for paint to
settle, decant clean liquid and use again. |
||||||
| Storage |
Keep in a cool dry
place and seal well. |
||||||
| Safety Precautions |
Flammable! Danger of spontaneous combustion! Keep rags soaked in Hard Floor Wax in water or allow to dry out completely and then take for recycling. Keep away from children. |
||||||
| Disposal | Ask advice about
quantities to prevent leftovers. Clean containers and take them to a recycling
centre. |
||||||
| Notes | The technical information
on this data sheet was provided by Biofa. If the situation requires you
to deviate from it, please contact Mike Wye & Associates (01409 281644).
This data sheet supersedes all previous technical information. Last amendment 02/12/02 |