| Characteristics | Colour
pigments made from natural raw materials to tint Stone Oil. The
available colours are white 2101, black 2102, yellow 2103, red 2104 and
blue 2105. All colour concentrates can be mixed. |
| Ingredients | Castor oil, aliphatic
hydrocarbons, colophony resin ester, feltspar, talcum, zinc oxIde, cobalt-,
zirconium- and zinc-octoate driers, citrus peel oil. Pigments used: spinell
pigments, ferric oxIde pigments, titanium dioxide, soot. |
| Directions for use | Stir
concentrates well before using, then mix the required amount into the
Stone Oil. Important: Make sure to ventilate well when working with the product and while it is drying! |
| Drying | Depending
on the surface, but on the average ready for painting after 16 hours (20-23°C/
50-55% relative air moisture). |
| Coverage | One litre will cover
8 - 10 m², depending on the absorbency of the surface. |
| Cleaning of implements |
Clean
immediately after use with Thinner. |
| Storage | Keep in a cool
and dry place. Put remains into smaller container and seal well to prevent
skin. Remove skin before using again. |
| Safety precautions | Flammable
Class A III! Danger of spontaneous combustion! Keep rags soaked in Colour Concentrates in water or allow to dry out completely on a non-combustible surface. Keep away from children. The raw materials used can cause a smell that is typical of the product. |
| Disposal | When buying the
product, ask advice about the quantities needed in order to prevent leftovers.
Clean out containers and take them to a recycling centre. Allow leftovers
to dry out and dispose of with your household rubbish. |
| Notes | Please observe the
data sheet of Stone Oil. The technical information on this data sheet was provided by Biofa. If the situation requires you to deviate from it, please contact Mike Wye & Associates (01409 281644). This data sheet supersedes all previous technical information. Last amendment 02/12/02 |