Mike Wye & Associates
Suppliers of Natural Building and Decorating Products
  • Phone us on 01409 281644
  • E-mail us by clicking on sales@mikewye.co.uk
  • Write to us at Buckland Filleigh Sawmills, Buckland Filleigh, Devon EX21 5RN, England.

    Please click here to return to Biofa Products Page

    BATIM FLOOR SOAP, WHITE

    Technical Information Sheet

    Characteristics Floor Soap, white is a high-quality and concentrated soap combination for the refinement, cleaning and maintenance of soaped and lixiviated surfaces. It has a high content of solid body and is free of phosphates and sulphates. Use for commonly stained softwood floors (e.g. in living rooms or bedrooms), wall and ceiling panelling as well as furniture, doors and worktops. Gives surfaces a light and whitish character.
    Ingredients Water, potash-soaped coconut and soya bean oil fatty acids, lavender oil.
    Directions for use
    • Preliminary treatment for soaped and lixiviated surfaces
      Apply a rich and even layer of Floor Soap and warm water (1:7) and let it rest for approx. 20 min. Work in using a brush or sanding mat. Re-move excessive liquid with squeegee. Repeat procedure 2-3 times. Let surface dry for 3 hours between each application. For best results polish surface with white pad after each drying period.
    • Maintenance and Care of soaped and lixiviated surfaces
      Mix Floor Soap and warm water (1:4). Apply a mist coat and mop surface - if required scrub or clean using a sanding mat. The shorter the influence the better the cleaning results. The resistance of the floor is built up gradually after each treatment. Repeat procedure 2-3 times if re-quired.
    • Important! Keep diluted soap in a cool place and use up in 14 days as the risk of stain formation and yellowing on wood increases after this period.
    Cleaning of implements Clean immediately after use with clean water.
    Usage / Coverage 10 - 15 mē/litre Floor Soap, undiluted.
    1 litre undiluted Floor Soap @ 1:7 coverage 70-100 mē.
    1 litre undiluted Floor Soap @ 1:40 coverage 400-600 mē.

    Storage

    Seal well and keep in a cool and frost-free area.
    Container sizes 1 lt / 2.5 lt / 5 lt PE-containers
    Safety Precautions Alkaline reaction. Wear skin and eye protection. Keep away from children.
    Disposal Large amounts must be disposed according to the local rules and regulations. Ordinary leftovers must be thinned with water (1:20) and can be tipped down the drain. Dispose empty and clean containers according to the local rules and regulations.

    Notes

    The technical information on this data sheet was provided by Biofa. If the situation requires you to deviate from it, please contact

    Mike Wye & Associates
    Buckland Filleigh Sawmills
    Buckland Filleigh
    Beaworthy
    Devon EX21 5RN

    Tel: 01409-281644
    Fax: 01409-281669
    www.mikewye.co.uk

    This data sheet supersedes all previous technical information.

    Back to the Top