| Use |
|
| Diffusion Value | Sd
< 0.1 m with single application |
| Colour | Available
in natural white or in all colours of the BAYOSAN colour card |
| Sizes | Plastic
bucket, 4 kg capacity (80 buckets per pallet = 320 kg) Plastic bucket, 15 kg capacity (30 buckets per pallet = 450 kg) |
| Coverage | Depending on nature
and absorbency of substrate: approx. 20 m² per 4 kg bucket approx. 75 m² per 15 kg bucket approx. 0.2 kg/m² approx. 5 m²/kg . |
| Preparation | Suitable
substrates include plasters containing gypsum, lime or cement, unpainted,
provided that these are clean and thoroughly dry. Loose parts, flaking and
hollow areas, dirt and dust must be removed. The surface must have set properly
and be completely dry. Sanding substrates must first be pretreated with
suitable precoats such as BAYOSAN PF 05 bonding agent. Pretreat walls affected
by algae and / or fungus with suitable agents before the application. If
there is a risk of water-soluble discolouration (old paintwork, traces of
glue, lignine compounds), precoat with dampcourse seals. |
| Application |
Dilute before application. Mix-ratio: 2 parts
BAYOSAN DG 27 decorative precoat and 1 part water. The material may only
be applied in the undiluted form to substrates containing gypsum. Application
is carried out with a brush or a lamb-fleece roller. Apply BAYOSAN DG
27 decorative precoat and apply evenly and generously. With highly absorbent
substrates, the procedure should be repeated after the first coating has
dried. Tools are to be cleaned immediately after use with hot water if
possible. Do not apply at less than + 5 ºC wall and air temperature. |
| Curing Time | Allow coating to dry
thoroughly (depending on environmental conditions and the absorbency of
the substrate, approx. 12 hours). After drying, all the usual decorative
plasters can be applied to the surfaces treated. |
| Cleaning | Wash tools with warm
water. |
| Storage | Store
closed buckets in cool area but not under + 5°C. Once opened, keep buckets
tightly closed and use within a short time. Keeps for approx. 12 months
in original pack. |
| Health & Safety |
|
| Ingredients | Synthetic resin dispersion
with additives of white or coloured pigments and silica sand |
| Note | This technical sheet is a guideline for Retailers and Paint Users. However, the user is responsible for testing the product on the intended surface to ensure that it is suitable for their requirements. This sheet was up dated on 10/04 and will be superseded by any subsequent editions. Information Sheets are available from your local stockist or our website, www.mikewye.co.uk |