| Description
|
Water-based
Gloss is a tough, high-opacity multi-surface acrylic gloss paint for
use in many interior or exterior applications. It dries to a smooth gloss
finish with excellent covering power and adhesion. Recommended for use in
kitchens and bathrooms. Compared to conventional gloss paints, it has a
much lower odour during application and drying.
|
| Surfaces |
Suitably
primed woodwork, primed iron and steel surfaces, MDF, aluminium, copper,
PVC. Ideal for kitchens, bathrooms and for use on radiators.
|
| Colour
|
Pure White,
Vanilla, Linen, Straw, Oatmeal, Pearl, Birch, Cotswold Stone, Blossom, Lilac,
Duck Egg, Sky Blue, Sage, Smoke, Dusk, Coral and Terracotta.
|
| Spreading Rate
|
Up to 14
square metres per litre depending on surface profile and porosity.
|
| Drying Rate
|
Touch dry
in 1 - 2 hours. Recoatable in 4 hours.
|
| Pack Sizes
|
2.5
litres and 1 litre
|
| Tecnical Information
|
| Sheen Level |
75 - 85% |
| Specific Gravity |
1.03 - 1.30 |
| Solids by Volume |
36% approximately |
| Dry
Film Thickness |
25 - 30 microns
per coat on smooth surfaces |
|
| Preparation
|
Surfaces
must be clean, dry and free fom loose and flaking material, dirt, grease,
etc. Repairs should be carried out proir to painting. Areas contaminated
by fungal or algal growth should be treated with a proprietary fungicidal
wash or with 25% household bleach before painting. Surfaces previously treated
with oil-based paint should be lightly abraded.
|
| Application
|
Stir well
before use. Ready for use by brush, roller or airless spray. On porous surfaces
up to 5% water may be added to assist application. On very porous surfaces,
e.g. plaster, up to 25% water my be necessary. Two coats over a suitably
primed surface are recommended for maximum protection.
|
| Clean Up |
Use
clean water
|
| Precautions
|
Always read
the can label before use. Do not apply to surfaces below 5°C or if there
is a risk of heavy rain or frost during application or drying.
|