Baumit Klima Glätt W (formerly RK30) fine top coat skim plaster creates a smooth, matt surface finish onto internal walls.
Baumit Klima Glätt W is a fine skimming plaster for a smooth, matt surface finish onto wall and ceiling surfaces in all internal areas including domestic kitchens and bathrooms. Suitable substrates include lime and cement based renders, “no fines” concrete surfaces, renovation plasters and renders. Baumit Klima Glätt W is suitable for receiving paint.
Can be applied onto Baumit base coat plasters such as the Baumit RK70.
Not suitable for use onto gypsum based substrates, in designated wet rooms or onto areas reserved for tiling.
- Natural white, powdered lime putty for indoor use
- For the production of high-quality, smooth surfaces on lime / cement-based plaster, concrete, aerated concrete and plasterboard.
- Highly permeable and improving the room climate. Ideal for manual and mechanical processing.
|Bag size||20 kg / 36 per pallet (720kg)|
|Consumption||app. 1 kg /m² / mm|
|Coverage per bag||app. 20m² / bag / 1mm|
|Min. application thickness||1mm|
Store in a dry, cool conditions, free from frost in sealed tubs. Shelf life 12months.
The substrate must be clean, dry, frost-free, dust-free, absorbent, free from efflorescence, stable and free from loose parts.
Put clean water in a clean bucket or mortar trough. Sprinkle with Klima GlatteW (Fino) and leave for 5 – 10 minutes, stir with a suitable stirrer (eg whisk) until a lump-free, creamy processing consistency is obtained.
Tip: To achieve an even creamier consistency, immerse Baumit KlimaFino 2 – 3 hours in advance, stir and stir again before use (about 8 hours pot life).
Apply Baumit Klima GaltteW (Fino) with the steel trowel, peel off and harden (possibly with material addition „press“) and after complete hardening (depending on the weather and underground absorbency from approx. 2 hours) cover with Baumit Klima GlatteW (Fino) in a slightly thinner consistency and produce the finest surface (smoothness) (do not smooth with water!) *.
Mix pasty Baumit Klima GlatteW (Fino) mixed with stirrer with wet conveyor suitable for levelling compounds (eg Strobl Strobot 401 S, PFT Ritmo, PFT Swing, PFT N2, etc.), peel off with the steel trowel and allow to harden (possibly with material added). After complete hardening (depending on weather conditions and surface absorbency from approx. 2 hours), cover with Baumit Klima GlatteW (Fino) in a slightly thinner consistency and produce the finest surface (smoothness) (do not smooth with water!) *.
Note: Total layer thickness 1 – 3 mm possible, 2 – 3 mm optimal.
*For smoothing, a minimum thickness of 1mm is recommended. If a finer surface and a grinding of the surface is desired, then the surface after grinding with e.g. Prime Baumit KlimaPrimer (diluted 1: 1 with water) to prevent chalking and different surface absorption.