The Kreidezeit Window Care Set is for the maintenance of wooden frame windows treated with Kreidezeit Stand Oil Paint or coloured Wood Lazure. Contains a care soap for gentle cleaning of dirty paints and a care oil for renewing protection and colour intensity.
Use the Kreidezeit Window Care Set for the maintenance of wooden frame windows treated with Kreidezeit Stand Oil Paint or coloured Wood Lazures.
To maintain the protective coat of the surface and its fresh look regular maintenance and care is recommended. Minimal effort needed as renovation coatings are not required for a long time because of the durability of the paint after treatment.
- 100 ml Care Soap
- 100 ml Care Oil
Observe the Product Data Sheet when using the Window Care Set.
Warning! There is a risk of self-ignition when working materials, such as cloths, are soaked with product.
Visually check treated surfaces every six months for dirt and damage; clean and repair if necessary.
During the half-yearly inspection and cleaning, assess the gloss of coated surfaces. Immediately treat areas that have lost their brilliance with the Kreidezeit Window Care Set. DO NOT treat areas with a sufficient brilliance as frequent usage on glossy surfaces can lead to a sticky and greasy appearance.
Kreidezeit Stand Oil Paint and Wood Lazure are environmentally friendly and therefore deliberately contain no fungicides. Even conventional wood coating systems equipped with fungicides commonly show mould (blackening, deep shadows). It is important you check for fungus (usually small black dots on the surface) at least every six months. Wipe off the mould with water and Kreidezeit Care Soap.
Do not clean wooden windows immediately after installation. Paint and silicon need approximately 4 weeks to dry completely. Clean the metal weather bar after installation. The drainage slots must not be clogged.
Rinse off dirt with a soft sponge and Care Soap (1 tablespoon soap mixed in 1 litre of water). Treat heavy dirt with a more concentrated soap solution.
Cleaning and Care
As a rule of thumb, maintenance is necessary on exposed elevations once a year and on sheltered elevations every 2 years. However, due to weather conditions and exposure these intervals could vary.
In principle there are no definite maintenance intervals for the Kreidezeit Stand Oil Paint or Wood Lazure system.
Let cleaned surfaces dry completely. Wipe the surfaces that have lost their gloss, especially on exposed elevations, gently with a cloth soaked in Care Oil. Wipe off any residue after 10 – 15 minutes with a dry cloth (residue oil can get sticky and very shiny!). The colour intensity will return. The application and drying temperature should be at least 10°C (50°F) over a period of at least 48 hours.
You may need to repaint surfaces if Stand Oil Paints and Wood Lazures
- have become badly weathered
- have faded in colour
- are showing the wooden surface beneath
- are showing bleeding/washing of pigments.
Clean the surface with Care Soap and lightly sand any remaining glossy surfaces.
Reapply Kreidezeit Wood Lazures or Full Rich Kreidezeit Stand Oil Paint as required.
100 ml Care Oil covers up to 5 m² of treated surface.
Care Soap: olive oil soap.
Care Oil: linseed oil, linseed stand oil, tung stand oil, lead-free drying agents.