Mike Wye
Export date: Tue May 17 7:18:49 2022 / +0000 GMT

Kreidezeit Multi Purpose Wax

Price: £8.10 - £28.80
+ VAT & delivery

Product Categories: , , ,

Product Tags:

Product Page: https://www.mikewye.co.uk/product/multi-purpose-wax-kreidezeit/


Product Variants

  • Kreidezeit Multi Purpose Wax - 1 Litre (512) ()
  • Kreidezeit Multi Purpose Wax - 180 ml (511) ()

Product Summary

Product Description

Kreidezeit Multi-Purpose Wax is a solvent free combination of natural beeswax and linseed oil, it is easy to use, dirt and water repellent, anti-static with a silky shine.

Made from natural beeswax, Kreidezeit Multi Purpose Wax is free of residues. Mixed with linseed oil varnish and stand oils, the result is a solvent free treatment for wooden surfaces.

Not suitable for use on floors.

The beehives of our suppliers are not treated chemically against the Varroa mites. The beeswax is molten and cleaned.

Use on untreated wood or primed with natural oils in the interior. Especially suitable for furniture, doors and wood panelling.

Apply thinly as a suitable care product for oiled surfaces.


  • Free of solvents.
  • Easy to use.
  • Diffusible.
  • Dirt and water repellent.
  • Anti-static.
  • Silky shine.

Composition (full declaration)

Linseed oil, beeswax, tung stand oil and manganese drier.


Depending on the absorption of the substrate, approx. 0.05 to 0.10 litres per m² per coat.
Exact consumption rate to be determined on the actual substrate.


Stir product thoroughly prior to processing. Remove any layers of oxidation caused during storage; do not stir in. Apply one or two coats of Kreidezeit Multi Purpose Wax, allowing the first coat to dry before applying the second. The substrate may require sanding before applying the second coat.

The product must not be poured onto surfaces! Clean and dust down untreated substrates.
To ensure good penetration, it is recommended to dilute the product with at least 20% Balsamic Turpentine ) for the first coat on very dense, poorly-absorbent and tannin-rich wood (such as oak).

1. Initial Sanding
Sand the wood (grit P80-100), rounding the edges. Do not use a finer sandpaper as this will make the wood too
dense and unable to absorb enough oil.
New, smooth, planed or finely pre-sanded wood should be rough sanded to ensure the oil can be absorbed.
Dust down thoroughly after sanding.

2. First coat
Apply Kreidezeit Multi Purpose Wax evenly with a brush, cloth or sponge. After 10-20 minutes, thoroughly wipe the entire treated area with a dry, lint-free cloth until the surface has a uniform satin appearance.

Ensure that all un-absorbed oil has been completely removed, as otherwise shiny or sticky patches may remain. Kreidezeit Multi Purpose Wax must fully penetrate into the wood. It must not form a layer on
the wood.

3. Re-sanding between coats (optional)
Re-sanding between coats is only required if the surface has dried rough, for example if wood fibres have dried
proud of the surface. Use sand paper in the direction of the grain.
Dust down thoroughly after sanding.

4. Second coat (optional)
A second coat may be necessary on more absorbent surfaces. Repeat as per the first coat.


Product added date: 2014-08-19 14:20:41
Product modified date: 2022-03-30 10:47:17

Export date: Tue May 17 7:18:49 2022 / +0000 GMT
Product data have been exported from Mike Wye [ https://www.mikewye.co.uk ]