Product Description
Savolit Plus Wood Wool Board
£4.30 – £30.00
+ VAT & delivery
Description
Savolit Plus wood wool board is a natural panel consisting of long, strong wood fibres which are bonded into panels by cement-binding agent into a compact coherent structure and used as a natural alternative to plasterboard.
The raw timber in Savolit Plus Wood Wool Board originates from sustainably managed forests and is PEFC labelled. From production, installation, lifespan and decomposition (recycling) Savolit Plus Wood Wool Board does not pose a risk to the environment and is 100% recyclable.
Produced in accordance to standard EN 13168 and are CE marked.
 |
|
For most applications it’s recommend you use 15 mm boards for internally and 25 mm boards for externally.
The 35 mm and 50 mm thick boards available on request.
Boards are fixed with 50 mm timber screws and 60 mm washers.
The P010 joint adhesive is used for bonding longitudinal and transversal joints of Savolit boards. The P101 adhesive covers approximately 15m² per tube.
The P010 adhesive can either be applied with the applicator gun, or by using the Nozzles. Both of these are sold separately and either one would be needed when using the P010 adhesive.
Delivery restrictions:
All boards that are 1200 x 600 mm are available for delivery on a standard size pallet for a vehicle with a tail lift and pump truck to manoeuvre the pallet onto hardstanding.
Both the 2000 x 600mm and 2400 x 600mm size boards will require you to have off load (forklift or telehandler) at the delivery address as they are too large for manual offload.
Example internal plaster specification for walls and ceilings using 15 mm Savolit Plus
- Isovit E-Cork applied with a notched trowel @ 3 mm.
- 4 mm glass fibre mesh.
- Isovit E-Cork @ 3 mm.
- Reabilita Cal AC (Finishing Render) @ 4 mm (applied in two 2 mm coats).
- For a smoother finish apply Regency Lime Plaster @ 1 mm (optional).
Example external render specification using 25 mm Savolit Plus
- Isovit E-Cork applied with a notched trowel @ 3 mm.
- 4 mm glass fibre mesh.
- Isovit E-Cork @ 3 mm.
- Reabilita Cal AC (Finishing Render) @ 4 mm (applied in two 2 mm coats).
Technical Data
| Property | Designation | Units | Data | Standard | ||||
|---|---|---|---|---|---|---|---|---|
| Board thickness | d | (mm) | 15 | 25 | 35 | 50 | 75 | |
| Board length | l | (mm) | 2400 2000 1200 |
2400 2000 1200 |
2400 2000 |
2400 2000 |
2000 | |
| Board width | b | (mm) | 600 | |||||
| Average Specific Mass | (Kg/m²) | 8 | 11.5 | 14 | 18 | 26 | ||
| Declared thermal resistance | RD | (m²K/W) | 0.20 | 0.35 | 0.50 | 0.75 | 1.15 | UNI EN 13168 |
| Declared thermal conductivity | λD | (W/mK) | 0.066 | |||||
| Bending strength | σb | (kPa) | 1650 | 2000 | 1450 | 1000 | 650 | EN 12089, A |
| Compressive strength at 10% deformation | σ10 | (kPa) | ≥ 200 | ≥ 150 | ≥ 150 | UNI EN 826 | ||
| Water vapour diffusion resistance factor | (-) | 5 | UNI EN 12086 | |||||
| Fire reaction | Euroclass B – s1, d0 | UNI EN 13501-1 | ||||||
| Thickness tolerance | (mm) | +3, -2 | UNI EN 823 | |||||
| Width tolerance | (mm) | ± 3 | UNI EN 822 | |||||
| Orthogonality | (mm/m) | ≥ 2 | UNI EN 824 | |||||
| Specific heat | kJ/kgK | 1.81 | ||||||
| Shear stress resistance | N/mm² | 0.28 | ||||||
| Capacity for thermal accumulation | kJm³K | 965-628 | ||||||
| Capacity for absorption of room humidity | l/m² | 2 – 3.5 | ||||||
| Resistance to water and frost | l/m² | No alteration and maintenance of bending resistance after 20 cycles of frosting and defrosting in water | ||||||
