Description

STEICO multi primer is used for the adhesion promotion / improvement of adhesive bonding’s with STEICO multi tape F on mineral substrates with different absorbency levels.

The STEICO multi primer is used for mineral substrates with difference absorbency levels (e.g. gypsum fibreboards, concrete, masonry as well as wood and wood-based materials like STEICO wood fibre insulation). 

The STEICO multi primer comes in a 1 litre bottle with dispenser, it is a milky white when applied and transparent after curing. 

Please note that the roller shown in the product image is not included.

Properties

• Solvent-free
• Rapid flash-off time
• High penetration
• Cold substrate can be processed from -10°C
• Efficient material application thanks to a practical dispensing bottle
• Good water resistance

Application

• Shake container well before processing
• The material is applied onto the substrate (min.100g/m², more material may be require depending on the substrate) via the guide opening of the container and distributed evenly using a brush of paint roller. The substrate must be dry and free from grease and dust.
• Before applying and pressing on STEICO multi tape, ensure the primer has sufficient flash-off time so that it becomes transparent (colour change allows for a visual check)
• The primer can be removed with water when freshly applied. Mechanical cleaning is usually possible only after the primer has cured.

Storage

Store the STEICO multi primer in a dry location at +15°C to +25°C. Protect from heat, cold and light.

Technical characteristics