Description

STEICO Multi Tape F is typically used for butt joints and joint adhesive bonding of STEICO wood fibre panels together with STEICO multi primer.

Properties

• Solvent-free
• High UV ageing resistance
• High moisture resistance/ rainproof
• Can be used indoors and in protected outdoor areas
• Can be processed from -10°C (dry and ice-free substrate required)
• Temperature resistant between -40°C and +100°C

Dimensions

Application

Processing in the STEICO sheet and membrane system

• Substrates must be capable of bearing a load, dry and free from dust and grease
• Align the STEICO multi tape F centrally, gradually remove the release liner and
  forcefully rub on the adhesive tape
• Split release liner facilitates the bonding of corners, as only one liner can initially be
  removed there
• Adhere the STEICO multi tape F without tension and creases. The substrate must be
  additionally mechanically secured if tensile forces arise
• Adhesive bonding’s may not be located in stagnant water;
  adhesive bonding’s are also not permitted in sauna and swimming pool construction

Processing in case of STEICO wood fibre panels

• Pre-treat the STEICO wood fibre panels in the adhesive area with STEICO multi primer
• After a sufficiently long flash-off time (when primer is
  transparent) position the 100mm or 150mm-wide STEICO multi tape F, remove release
  liner and rub on
• The bonding surface on the wood fibre panel must be at least 50mm
• Additional pressing on with a paint roller or roller is recommended in order to
  improve adhesion

Storage

Store STEICO Multi Tape F in a dry location at +5°C – +25°C.

Protect it against heat, cold and light.