Description

Kreidezeit Wall Filler is a marble white, purely lime-bound filling and smoothing plaster for interior use.

Use Wall Filler for interior use on all solid, slightly absorbent substrates such as lime and lime cement plasters, gypsum plaster and concrete.
Suitable for full-surface filling of plasterboard after jointing with materials recommended by the panel manufacturers.

Not suitable as joint filler for gypsum plasterboard.

Do not use on wood, wood materials and natural resin dispersion paints.

Compared to gypsum based fillers it has no specific shelf life which means that it does not harden once mixed and is usable for many months if stored airtight.

Coverage

Approximately 0.9 kg of powder per m² per 1 mm of thickness on smooth surfaces.

Application

Mixing
Stir the powder into the required amount of clean, cold water. Allow to swell for at least 15 minutes and stir well again before use.

Add 0.45- 0.5 litres of water per 1 kg of powder.
Basically, the product must be adjusted with water on site to a good processing consistency for the given substrate, i. e. the amount of water may have to be increased slightly.

Application
Application temperature at least 8 °C.
Processing time at least 8 hours.
Apply the with trowel or smoother. Pre-fill plug holes with Wall Filler first and let dry a few hours.Then overcoat again with Wall Filler and level out.

Over-coating
Paint with casein paints, distemper, clay paints, lime paints and breathable emulsions. Pre-paint the wall filler with any recommended primers.
Do not overcoat with plasters, silicate paints and wallpaper.

Drying times
24 hours per 1 mm of thickness.